LED Single-sided MC PCB Aluminum Base Circuit Board LED PCB
Basic Info
Model No. | PCB-A15 |
Transport package | Vacuum Packing |
Certification | UL,ISO9001&ISO14001,RoHS |
Definitions | IPC Class2 |
Minimum Space/Line | 0.075mm/3mil |
Production Capacity | 10,000 s.q.m/monthly |
HS Code | 8534009000 |
Origin | Made in China |
Product Description
Item |
Speci. |
Layers |
1~2 |
Common Finish Board Thickness |
0.3-5mm |
Material |
Aluminum Base, Copper base |
Max Panel Size |
1200mm*560mm(47in*22in) |
Min Hole Size |
12mil(0.3mm) |
Min Line Width/Space |
3mil(0.075mm) |
Copper Foil Thickness |
35μm-210μm(1oz-6oz) |
Common Copper Thickness |
18μm, 35μm, 70μm, 105μm. |
Remain Thickness Tolerance |
+/-0.1mm |
Routing Outline Tolerance |
+/-0.15mm |
Punching Outline Tolerance |
+/-0.1mm |
Solder Mask Type |
LPI(liquid photo image) |
Mini. Solder Mask Clearance |
0.05mm |
Plug Hole Diameter |
0.25mm--0.60mm |
Impedance Control Tolerance |
+/-10% |
Surface finish |
Lead free HASL, immersion gold(ENIG), immersion sliver, OSP, etc |
Solder Mask |
Custom |
Silkscreen |
Custom |
MC PCB Production Capacity |
10,000 s.q.m/monthly |
Q/T Lead Time
As the current mainstream, we mostly do single aluminum PCB, while it is more difficult to do double sided aluminum PCB.
Small Batch Volume ≤1 sq meter |
Working Days |
Mass Production >1 sq meter |
Working Days |
Single Sided |
3-4 Days |
Single Sided |
2-4 weeks |
Double Sided |
6-7 Days |
Double Sided |
2.5-5 weeks |
Quality Control
BIS solves the aluminum PCB problem?
Raw materials are strictly controlled: The pass rate of incoming material above 99.9%. The number of mass rejection rates is below 0.01%.
Copper Etching Controlled: the copper foil used in Aluminum PCBs is comparatively thicker. If the copper foil is over 3oz however, the etching requires width compensation. With the high precision equipment imported from Germany, the min width/space we can control reaches 0.01mm. The trace width compensation will be designed accurately to avoid the trace width out of tolerance after etching.
High Quality Solder Mask Printing: As we all know, there is a difficulty in solder mask printing of aluminum PCB due to copper thick. This is because if the trace copper is too thick, then the image etched will have a large difference between trace surface and base board and solder mask printing will be difficult. We insist on the highest standards of solder mask oil in the whole process, from the one to the two-time solder mask printing.
Mechanical Manufacturing: To avoid reducing electrical strength caused by the mechanical manufacturing process, involves mechanical drilling, molding and v-scoring etc. Therefore, for low-volume manufacturing of products, we prioritize using the electric milling and professional milling cutter. Also, we pay high attention to adjusting the drilling parameters and preventing burr from generating.
Certificate
Specification of Aluminum Based
Item |
Test a |
AL-01-P Specification |
AL-01-A Specification |
AL-01-L Specification |
Unit |
|
Thermal Conductivity |
A |
0.8±20% |
1.3±20% |
2.0±20% |
3.0±20% |
W/m.K |
Thermal Resistance | 0.85 | 0.65 | 0.45 | 0.3 | ℃W | |
Solder Resistance | 288deg.c | 120 | 120 | 120 | 120 | Sec |
Peel Strength Normal Status |
A Thermal |
1.2 |
1.2 |
1.2 |
1.2 |
N/mm |
Volume resistivity Normal Status |
C-96/35/90 E- |
108 |
108 |
108 |
108 |
MΩ.CM |
Surface Resistivity Normal Status |
C-96/35/90 E- |
107 |
107 |
107 |
107 |
MΩ |
Dielectric Constant | C-96/35/90 | 4.2 | 4.9 | 4.9 | 4.9 | 1MH2 |
Dissipation Factor | C-96/35/90 | ≤0.02 | ≤0.02 | ≤0.02 | ≤0.02 | 1MH2 |
Water Absorption | 0.1 | 0.1 | 0.1 | 0.1 | % | |
Breakdown Volte | D-48/50+D-0.5/23 | 3 | 3 | 3 | 3 | KV/DC |
Insulation Strength | A | 30 | 30 | 30 | 30 | KV/mm |
Raise Camber | A | 0.5 | 0.5 | 0.5 | 0.5 | % |
Flameability | UL94 | V-0 | V-0 | V-0 | V-0 | |
CTi | IEC60112 | 600 | 600 | 600 | 600 | V |
TG | 150 | 130 | 130 | 130 | ℃ |
Product Thickness |
The actinium screen is thick : 1 oz~15 oz, The aluminium board is thick: |
Product Specification |
1000×1200 500×1200(mm) |
• Voice frequency equipment input,output amplifer,compensating capacitor, the voice frequency amplifier, preamplifier, power amplifier etc. • Power supply equipment: series voltage regulation, switch modulator,and DC-AC transducer …etc. • Telecommunication electron equipment high frequency amplifier, fiter telephone, send a telegram telephone. • Office automation:the printer driver,big electronic display substrate and thermal print A class. • Autocar the igniter, power supply modulator and swap transform machine, power supply controller, become only system etc. • Calculator. CPU board, soft pan driver,and power supply device …etc. • Power mold mass:change to flow a machine, solid relay, commuter bridge etc. • LED light, heat and water expense:big power LED light, LED wall etc |
FAQ
To ensure an accurate quote, be sure to include the following information for your project:
l Complete GERBER files: including the BOM list
l Quantities: Choose Num (pcs)
l Dimensions: Height X Width mm
l Turn time: working days
l Panelization Requirements
l Materials Requirements
l Finish requirements
Your custom quote will be delivered in just 2-24 hours, depending on the design complexity.
Checked within 12 hours. Once Engineer's question and working file checked, we'll start the production.
Production capacity of hot-sale products |
|
Double Side/Multilayer PCB Workshop |
Aluminum PCB Workshop |
Technical Capability |
Technical Capability |
Raw materials: CEM-1, CEM-3, FR-4(High TG), Rogers, TELFON |
Raw materials: Aluminum base, Copper base |
Layer: 1 layer to 20 Layers |
Layer: 1 layer and 2 Layers |
Min.line width/space: 3mil/3mil(0.075mm/0.075mm) |
Min.line width/space: 4mil/4mil(0.1mm/0.1mm) |
Min.Hole size: 0.1mm(dirilling hole) |
Min. Hole size: 12mil(0.3mm) |
Max. Board size: 1200mm* 600mm |
Max.Board size: 1200mm* 560mm(47in* 22in) |
Finished board thickness: 0.2mm- 6.0mm |
Finished board thickness: 0.3~ 5mm |
Copper foil thickness: 18um~280um(0.5oz~8oz) |
Copper foil thickness: 35um~210um(1oz~6oz) |
NPTH Hole Tolerance: +/-0.075mm, PTH hole Tolerance: +/-0.05mm |
Hole position tolerance: +/-0.05mm |
Outline Tolerance: +/-0.13mm |
Routing outline tolerance: +/ 0.15mm; punching outline tolerance:+/ 0.1mm |
Surface finished: Lead-free HASL, immersion gold(ENIG), immersion silver, OSP, gold plating, gold finger, Carbon INK. |
Surface finished: Lead free HASL, immersion gold(ENIG), immersion silver, OSP etc |
Impedance control tolerance: +/-10% |
Remain thickness tolerance: +/-0.1mm |
Production capability: 50,000 s.q.m/month |
MC PCB Production capability: 10,000 s.q.m/month |
ISO9001, ISO14001,UL USA& USA Canada,IFA16949, SGS, RoHS report.
We respect customer's copyright and will never manufacture PCB for someone eles with your files unless we receive written permission from you, nor we'll share the files with any other 3rd parties.
Our Quality Assuring Procedures as below:
a),Visual Inspection
b),Flying probe, fixture tool
c), Impedance control
d), Solder-ability detection
e), Digital metallograghic microscope
f),AOI (Automated Optical Inspection)
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company send inquiry to us.
Please send the details inquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place, etc. We will make an accurate quotation for you as soon as possible.
We provide freight according to the rules setting by express company, no more extra charge.
On time delivery rate is more than 95%
a),24 hours fast turn for double side prototype PCB
b),48hours for 4-8 layers prototype PCB
c),1 hour for quotation
d),2 hours for engineer question/Complaint feedback
e),7-24 hours for technical support/order service/manufacturing operations